Swashplate Type - GRAUPNER mc-16 Programming Manual

SWASHPLATE TYPE

Swashplate Mixer
(access via Set-Up Menu)
Four different programs exist for the control of the
swashplate:
"N" (Normal) The swashplate is tilted for roll by a
servo; the collective pitch control is by a
separate servo. Type "N" also includes those
helicopters with mechanic mixers to achieve
the collective and cyclic blade control.
"2" The swash plate is axially moved for collective
pitch by two roll / collective pitch servos; fore &
aft pitch control is decoupled by a mechanical
mixer (HEIM mechanics).
"3" Symmetrical three point control of the
swashplate using three coupling points at
120°, to which a fore & aft pitch / collective
pitch servo (in front or at the rear) and two roll
/ collective pitch servos (laterally on the left
and right) are connected. For collective pitch
all three servos move together to move the
swashplate axially.
"4" Four point control of the swashplate with two
roll / collective pitch and two fore & aft pitch /
collective pitch servos.
The selection of the code is achieve using the
buttons.
DEC
/
INC
Helicopter 67