GRAUPNER mc-16 Programming Manual page 3

mc-
16/20
Expandable Radio Control Set for a maximum of 16 channels
Using the proven computer system mc-16 as the
basis of the new mc-16/20 Microcomputer Remote
Control set was developed. With the series already
equipped with 20 model memories, the mc-16/20
offers features to beginners and more experienced
equally.
The controls and ergonomically optimised transmitter
case have been developed further and gain an LCD
for precise and clear display of all functions. It also
enables, even in bright sunlight, secure adjusting
and reading of all model-specific parameters.
A more intelligent chip and complex software offer a
maximum of security and reliability. Owing to this
innovative technology, modules for the
implementation of complex coupled functions are no
longer required in the transmitter, and complex
mechanical mixers become unnecessary in the
model construction.
The program selection, based on experience, are
simpler and offer the scope and flexibility to adjust
complex control functions to suit the requirements of
the user. In particular, importance was attached to
the interests of the intermediate user.
The user is persuaded by the simple and clear menu
structure, and the conveniently fast selection of most
functions. In addition, the mc-16/20 copes with every
request up to the demanding competition application.
Half the program functions are common to the five
different model types. Each type of model, from the
simple glider to the modern high speed helicopter,
contains model type specific functions, which allow
programming of a flight model. Depending upon
personal requirement and operator ability, individual
functions can be switched off with optional external
switches.
You should take notice of the organisation of the
completely revised programming manual, and in
particular to the clear and detailed operation and
programming structure it represents.
Since the software covers special programs for the
operation of both fixed-wing models and modern
model helicopters, the operating instruction are
arranged into several sections:
After a section concerning general operating
instructions, the second section gives transmitter
basic adjustments. Thus adjustments independent of
model type, are described like model storage, name,
type and modulation mode, among other things.
Following this are adjustments such as servo
direction, servo reversal, freely programmable
Mixers, etc., since these functions are common to all
model types at your disposal. Afterwards the
program descriptions for model types of the class of
gliders and power planes follows.
STANDARD,
UNIFLY,
F3B / BUTTERFLY and
AEROBATIC.
The fifth model type is dedicated to the helicopter. It
covers all adjustment possibilities that available for
the programming of a helicopter, even if they were
already described for the fixed-wing models. This
saves time consuming paging back and forward the
instructions. Due to the complexity of the programs
with this type of model it is recommended to observe
the suggested programming order.
The reference sections are placed in front of the
program sections for each type of model, and
functions in clear flow charts and menu diagrams.
Block diagrams clarify, in a simple way, the signal
flow through the different functions that can be
modified and between the control sticks and receiver
outputs.
In the appendices the NAUTIC multi-function module
is presented. It also contains information about
further accessories, technical data etc.
Is advised that the beginner and less experienced
model fliers initially attach as many servos as
possible to the receiver and to first complete all
functions in accordance with the guidance. He will
learn, in the shortest possible time, the main
operating steps of the mc-16/20 required to be able
to make a meaningful program for the model to be
finished.
Kirchheim Teck, in June 1993.
3