S/Mode Menu - GRAUPNER X-8N Manual

Meaning of the functions for
LAP TIMER
LAP STOP
UP TIMER
DN TIMER
START MOD
CL ST
CL ESC
TK ST
VOICE RPT
VOICE TRG
IDLE ACT
PUMP ACT
ST DREXPO
TH EXPO
AUX3
AUX4
ABS ACT
FIX.VOICE
PMIX1 ACT
PMIX2 ACT
PMIX3 ACT
PMIX4 ACT
PMIX5 ACT

S/MODE menu

CRAW SET (Crawler)
4WS: switch over ACT=active, INH=inactive (activation of all-wheel steering)
DUAL ESC: switch over ACT=active, INH=inactive (rotating direction with two separate drives)
ST MODE: FRONT, REAR, NORMAL, REVERSE (see following sketch, steering)
ESC MODE: FRONT, REAR, NORMAL, REVERSE (see following sketch; drives)
SW: Display of switches which can be assigned to this function in the SW FUN menu (see list in
Chapter "SW FUN menu")
PS1~ PS2,TR1A~TR5B, TH, ST Switch
Activate stopwatch for lap time (TIMER menu)
Stopping the split time (TIMER menu)
Stopwatch (counting up) (TIMER menu)
Stopwatch (counting down) (TIMER menu)
Activate start mode (START menu)
Crawler steering mode
Crawler ESC mode
Track vehicle steering mode
Repeat voice output
Start voice output
Activate IDLE UP function
Activate PUMPING function
Activate DUAL/EXPO function for steering
Activate EXPO function for throttle
Activate channel 3 function
Activate channel 4 function
Activate ABS function
Activate playlist (see Telemetry menu)
Program Mix1 ACT/INH
Program Mix2 ACT/INH
Program Mix3 ACT/INH
Program Mix4 ACT/INH
Program Mix5 ACT/INH
In this menu, you can select preprogrammed mixers for the
various model types (crawler, track vehicle, boat), which are
tuned for the characteristics of the vehicles. After activating
the function, further settings can be made in the menus:
After you switched from INH to ACT in line CRAW, TANK or
BOAT in column ACT, you change to SET and confirm with
ENTER.
INNOVATION & TECHNOLOGY
33