Troubleshooting - Siemens HiPath 2000 Administration Manual

Setting Up the Telephone
Step by Step
01=Network?
01=DHCP IP assign?
>
off?
>
02=Terminal IP addr.?
Change?
>
03=Terminal mask?
Change?
>
00=End?
16
Only if no DHCP server:
:
Confirm.
>
:
Confirm.
>
:
Confirm to switch the DHCP IP assign off.
>
The change is displayed.
:
Select and confirm.
>
:
Confirm.
>
o
Enter the IP address of the optiPoint 410/420
(to edit see
:
Confirm. The IP address is displayed.
:
Select and confirm.
>
:
Confirm.
>
o
Enter the terminal mask of the optiPoint 410/420
(to edit see
:
Confirm. The terminal mask is displayed.
:
Choose and confirm to go to the top level of the
>
Configuration menu.
In all configuration types
Enter the Gateway address for communication with
the HiPath system via the gateway. Entry is only
possible via web-based management, see
Menu System > Gateway settings, see
Enter the Registration subscriber number (extension
number). The extension number must be stored in the
HiPath system.
Menu System > Gateway settings, see
Menu System > Subscriber number, see

Troubleshooting

If the optiPoint 410/420 economy/economy plus/
standard/advance does not function after making the
described configuration, the failure can be attributed to
peculiarities of the network environment.
More information on troubleshooting is available in
Section „Startup Not Successful"
Page 106).
Page 107).
Page 51.
Page 65.
Page 65.
Page 27.
Page 104.