Troubleshooting - Siemens optiPoint 410 Administrator's Manual

Setting Up the Telephone
Step by Step
!
02=System?
01=PBX Address?
Change?
!
02=Subscriber number? >
Change?
!
00=End?
Restart?
14 14 14 14
In all configuration types:
ã
Choose and confirm.
>
ã
Confirm.
>
ã
Confirm.
>
K
Enter IP address of the HiPath PBX
(to edit see Æ page 94).
ã
Confirm. The IP address is displayed.
ã
Choose and confirm.
ã
Confirm.
>
K
Enter the subscriber number of the optiPoint 410
(to edit see Æ page 92).
ã
Confirm. The subscriber number is displayed.
ã
Choose and confirm twice to end the configuration
>
menu.
ã
Confirm to restart the optiPoint 410.
>
After the restart finished the phone is in idle state.

Troubleshooting

If the optiPoint 410 economy/standard does not func-
tion after making the described configuration, the failure
can be attributed to peculiarities of the network environ-
ment.
More information on error detection is available in the
"Start up not successful" Æ page 90.
Installing the Telephone