Restarting The Telephone - Siemens HiPath 2000 Administration Manual

Administration
Step by Step
Warning: Restarting
User request
NETBOOT - 1.10
optiPoint 410
4:28PM
1228
36

Restarting the Telephone

Web-Based Management tool
Reset via the web-based management tool
1. Open the dialog "Restart Terminal".
Menu: Administrator Actions > Restart Terminal
2. Click the "Restart" button.
Interrupting the Power Supply
Disconnect the red Western plug of the power supply
unit cable (Pos. 3
disconnect the LAN cable (Pos. 1
optiPoint 410/420 for a few seconds.
Then reconnect the plug.
After Restart
The following messages appear in sequence following
a normal restart:
Idle display after successful restart.
16.07.03
>
Page 13) or, for "Power over LAN",
Page 13) from the
Page 51.