Siemens HiPath 2000 Administration Manual page 34

Administration
Step by Step
>
07=Ping Test?
01=User specified IP?
02=PBX address?
03=DL server address? >
04=Default Router IP?
05=Route 1 Gateway IP?>
06=Route 2 Gateway IP?>
07=SNMP trap address? >
08=Terminal IP addr.?
09=DNS IP addr.?
10=SNTP IP?
Ping?
>
Change?
34
PING Test
For detailed information see
Switch to the administration area and choose
"Diagnostics"
:
Select and confirm.
>
:
Confirm.
>
or
:
Select and confirm.
>
or
:
Select and confirm.
or
:
Select and confirm.
>
or
:
Select and confirm.
or
:
Select and confirm.
or
:
Select and confirm.
or
:
Select and confirm.
>
or
:
Select and confirm.
>
or
:
Select and confirm.
>
Execute Test:
:
Confirm to start pinging.
>
The result appears on the display after a few seconds.
or Change PING Target:
:
Select and confirm.
>
o
Enter the IP address (to edit see
:
Confirm. The change is displayed.
By changing the IP addresses of the entries
"02=..." to "10=...", the IP addresses actually
entered in the optiPoint 410/420 are changed.
This can lead to a limitation of functions.
Page 85.
Page 21.
Page 106).