Siemens HiPath 2000 Administration Manual page 70

Alphabetical Reference
Application Version
•
Asset Identity
•
Audio Loop Test
•
•
Cancel Mobility Password
•
•
•
•
Certificate Check
•
•
•
Clear Screenlock Password
•
•
Clear User Data
•
•
Codec
•
70
Displays the version of the telephone software. It contains information
about the functional range of the optiPoint 410/420 and may change if
the telephone software is updated (
Page 31 Page 54
This number displays information about the
Telephone Models of your optiPoint 410/420.
Page 54
The test activates the microphone and the loudspeaker in the handset.
You can check these components by speaking and listening.
Page 27
If the subscriber number of the "guest telephone" was not logged off,
this can be done on the "home telephone" after entering this password.
Valid values: Alphanumeric
Minimum length: 6 (for more information, see
Maximum length: 20
Page 65
This entry is only available in the local telephone menu if TLS has been
selected for Transport Base/Transport mode.
CA certificates are transmitted with
The default setting is "Off".
Page 29 Page 65
Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
This resets the user password.
Page 54
Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
This function allows you to delete all the entries made by the user on
the optiPoint 410/420.
Page 55
You can select the audio transfer principle here that is to be used.
Application File Name).
Properties of the
Password Functions)
DLS.