Siemens HiPath 2000 Administration Manual page 82

Alphabetical Reference
LDAP Template File Name
•
•
•
•
•
LED Test
•
•
Line Status
•
•
•
•
82
Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
If an LDAP server is used, enter the name of the LDAP template file
that is used in connection with this server.
The file must exist in a defined directory on the
Server Address).
Default name Page 109.
Download file Action on Submit
Page 60
Conduct this test to check the function of the
optiPoint 410/420.
All the LEDs blink during the test.
Page 32
Activate the display to view the functions and values used to run the
LAN connections on the optiPoint 410/420.
Bit rate, activity, half / full duplex, as well as the status of the used
network or the manual setting on the optiPoint 410/420.
The status is displayed by the
[1]
Port Function
PC Activity
Speed
Duplex
(no function)
LAN Activity
Speed
Duplex
(no function)
[1] See Page 13.
The status monitor remains active even during normal operation of the
optiPoint 410/420. However, it does not affect the operation of the
function keys.
Page 35
LEDs in the right-hand row:
LEDs on optiPoint 410/420
(right-hand row)
LED1 Not Active
LED2 10 Mbit/s
LED3 Half-Duplex
LED4 -
LED5 Not Active
LED6 10 Mbit/s
LED7 Half-Duplex
LED8 -
FTP server ( FTP
LED on the
Active
100 Mbit/s
Full-Duplex
-
Active
100 Mbit/s
Full-Duplex
-