Error Messages - Siemens HiPath 2000 Administration Manual

Administration
Step by Step
LEDs on the phone:
42

Error Messages

The LEDs flash until you switch to the administration
area Page 39.
No IP address
The DHCP server cannot assign a terminal IP address
Page 91.
Possible solution
Check the DHCP server.
No terminal mask
The DHCP server cannot assign a terminal mask
Page 91.
Possible solution
Check the DHCP server.
No default route
The DHCP server cannot assign a default route
Page 73.
Possible solution
Check the DHCP server.
No IP address set
The DHCP IP assignment
and no terminal IP address is configured.
Possible solution
Activate the DHCP IP assignment
Enter the terminal IP address
Page 74 is switched off
Page 18.
Page 18.