Fixing Problems; Protection Of The Telephone; Troubleshooting - Siemens OpenStage 60 User Manual

Hipath 8000 series
Hide thumbs Also See for OpenStage 60:
Table of Contents

Advertisement

Fixing problems

Fixing problems

Protection of the telephone

Troubleshooting

Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone
("Do not disturb" appears on the screen
You cannot dial an external number:
Check whether your telephone is locked ("Phone locked - Enter PIN to un-
lock" appears on the screen). If the phone is locked, enter your PIN to un-
lock it.
To correct any other problems:
First contact the relevant service personnel. If the service personnel are
unable to correct the problem, contact Customer Service.
126
Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use cleaning fluids containing alcohol or plastic-damaging deter-
gents to clean the telephone. The use of scouring agents is also forbid-
den.
page 19. If so, deactivate it.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 80

Table of Contents