Siemens HiPath 2000 Administration Manual page 50

Administration
Step by Step
50
Configuring the LDAP Server
Perform the following steps to enter the LDAP server IP
address and port number.
1. Start the web-based management tool, see
Page 51.
2. Select "Administration" > [password] >
"Applications" > "LDAP", see
3. Enter the IP address of the LDAP server, see
Page 80.
4. Click "Submit".
5. Select "System" > "Port Settings", see
6. Enter the port number for communication with the
LDAP server, see
7 . Click "Submit".
Installing an LDAP Template
A standard template is already installed. You can
also install a template that corresponds to your
personal criteria. See
of this template.
Perform the following steps to transfer the template to
your optiPoint application module:
1. Make sure that an FTP server is available, see
Page 102, and that the relevant template file is
stored on the server.
2. Start the web-based management tool, see
Page 51.
3. Select "Administration" > [password] > "File
Transfer", see
4. Enter the following parameters:
– FTP server address, see
– FTP account name, see
– FTP user name, see
– LDAP template file name, see
5. Select "Download LDAP template" from the field
"Action on submit", see
6. Click "Submit".
Page 56.
Page 80.
Page 80 for an example
Page 60.
Page 76
Page 75
Page 76
Page 82
Page 68.
Page 66.