Technician Level Menu - Valcom V-WMCA Instruction Manual

Valcom Master Clock
System Settings - This link, when clicked, will enter the System Settings pages. These pages include the user pass-
1
word, the RS485 data rate, setting the offset, the input selection, setting Clock #1 and Clock #2 sync-wire protocol
outputs and resetting the unit back to manufacturer's default settings.
IP Settings - This link, when clicked, will enter the IP Settings pages. These pages include setting the IP address,
2
gateway, subnet mask, DNS, DHCP configuration, setting the NTP servers, as well as displaying the status of the de-
vice.
Feature Settings - This link, when clicked, will enter the Feature Settings pages. These pages include setting the dis-
3
play format in 12 or 24 hour mode, enabling or disabling Daylight Savings Time and editing the standard durations
for each zone.
Database Maintenance - This link, when clicked, will bring the user to the Database Maintenance section. This is
4
where all of the events and schedules can be saved and backed up. Saved events and schedules can also be
downloaded in this section.
Diagnostic - This drop-down list allows the user to send the appropriate diagnostics to the analog clocks. See the
5
analog clock's manual for descriptions of each diagnostic.
Duration - This field is where the user can select how long (in minutes) that the user wants the diagnostic to display
6
on the face of the clock.
Start Diagnostic - This button, when pressed, will start the selected diagnostic.
7
Menu - This button, when pressed, will bring the user back to the main menu.
8
(V2)
Web Browser Programming

Technician Level Menu

1
2
3
4
5
7
8
6
Page 22