Setting The Secondary Input; Setting The Offset; Setting The Bias Seconds - Valcom V-WMCA Instruction Manual

Valcom Master Clock
(V2)
Press the top button to enter option 31. The number
"31" will appear on the left side of the LED display.
This option allows the user to select the secondary
auxiliary input. Press the bottom button to scroll
between "1-13" to select the input.
01 - SNTP
02 - 59 Minute Correction
03 - 58 Minute Correction (1)
04 - 58 Minute Correction (2)
05 - 58 Minute Correction (3)
06 - 58 Minute Correction (4)
07 - National Time/Rauland
Press the top button to enter option 32. The num-
ber "32" will appear on the left side of the LED
display. This option allows the user to set the offset
of the user's time zone location. Press the bottom
button to scroll through "-12 to 12". See Fig 3.1
on page 23 for examples of common offsets.
Press the top button to enter option 33. The num-
ber "33" will appear on the left side of the LED
display. This option allows the user to set the bias
seconds which allows the user to adjust the input's
time plus or minus 7500 seconds. Press the bot-
tom button to scroll through "-9999 to 7500".
Press the top button to enter option 34. The num-
ber "34" will appear on the left side of the LED
display. This option allows the user to set the hour
that the time is to go to when Once A Day Pulse is
selected. Press the bottom button to scroll through
"00-23".
*This option is only available if option 30 or 31 is
set to 11.
08 - Dukane
09 - Rauland Digital
10 - Wireless Repeater
11 - Once a Day Pulse*
12 - GPS
13 - RS485
* - Selecting this allows access to options 34-36
Page 16