Enabling Anonymous Call Rejection; Disabling Anonymous Call Rejection; Authorization Code Calling; Call Block (Selective Call Rejection) - Cisco 7960 User Manual

Enabling Anonymous Call Rejection

1. Press *77 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. Hang up.
On any subsequent incoming call that provides no caller ID, the calling party gets
a message that the party they are calling does not accept anonymous calls.

Disabling Anonymous Call Rejection

1. Press *87 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. Hang up.

Authorization Code Calling

This feature is available system-wide to allow/deny long distance dialing and does
not appear as a button on your telephone.
If you are required to enter an authorization code for a call, follow these steps:
1. Access an outside line.
2. Press the # sign.
3. Enter the authorization code (obtained from your system administrator). When
the correct code is entered, you hear dial tone.
4. Enter the desired number you want to call.

Call Block (Selective Call Rejection)

Call Block (also known as Selective Call Rejection) allows you to program your
phone to reject calls from a list of telephone numbers. All calls from phones on the
list receive a message which says you are not accepting calls.
To use this feature (*60), you create a list of telephone numbers (internal or
external) that receive the message when a call with that caller ID appears at your
telephone.
Call Block is managed through a menu of commands activated by pressing digits
on the keypad. The menu commands are:
•
22 System Telephone Features
1 - Enable/disable feature
Cisco 7960/7940 Telephone User Guide
620-05600230