Listening To Access Code; Managing The Selective Caller List; Adding To The List; Listening To The List - Cisco 7960 User Manual

Listening to Access Code

1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 3 to hear the 3-digit Access Code.
4. Listen to the Access Code.
5. Select a menu item or hang up.

Managing the Selective Caller List

Your 10-digit Selective Call List access codes are managed using the keypad on
your telephone. You can change the codes at any time and can listen to the
numbers you have programmed. You can delete numbers from the list which will
end their ability to call you, change the numbers, or to remove an old or no longer
used number so you can add new numbers.

Adding to the List

1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 4 to add numbers to the Selective Call List.
4. Enter the number by pressing the desired digit keys on the telephone keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
NOTE: If you try to add a number when you already have 10 numbers, a
prompt tells you the list is full, no more numbers can be added and that a
number must be deleted to add a new number.

Listening to the List

1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
Cisco 7960/7940 Telephone User Guide
620-05600230
System Telephone Features 47