Adding Numbers To Call Block List; Listing Blocked Numbers; Deleting Numbers From Call Block - Cisco 7960 User Manual

Adding Numbers to Call Block List

1. Press *60 or *80 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Call Block is enabled or disabled and then
gives the menu choices.
3. Press 3 to add telephone numbers to the list of numbers that will be blocked.
4. Enter the number with no spaces, dashes or special characters followed by the
# key.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.

Listing Blocked Numbers

1. Press *60 or *80 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Call Block is enabled or disabled and then
gives the menu choices.
3. Press 4 to hear the list of numbers which will be blocked.
The voice prompt announces the list and the first number.
4. Press # to hear the next number or press * to return to the Call Block menu.
NOTE: As long as you press # for the next number, the system will scroll
through the list of member numbers, starting over with the first number after
the last number is spoken.
5. Repeat the previous two steps until you have heard as many of the numbers
as you want.
6. Press * to return to the Call Block menu when you are finished listening to
member numbers.

Deleting Numbers from Call Block

1. Press *60 or *80 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
24 System Telephone Features Cisco 7960/7940 Telephone User Guide
620-05600230