Making A Call; Using The 7960 Mgcp; Using The 7960 Sccp; Selecting A Ringer Sound - Cisco 7960 User Manual

•

Making a Call

Using the 7960 MGCP

1. Initiate the call.
NOTE: On the 7960 MGCP, this step can be skipped if making a call on the
speakerphone. Starting with step 2 will turn on the speakerphone.
a. Do one of the following
b. On the 7960 SIP, pressing NewCall. The speakerphone turns on.
2. Press the digits for the desired extension (e.g., 1105).
3. On the 7960 SIP, press Dial.

Using the 7960 SCCP

1. Press the digits for the desired extension (e.g., 1105).
2. Place the call by:
•
•
•
•

Selecting a Ringer Sound

To change the sound of your telephone's ringer ("personalized ringing"), follow
these steps:
1. Press the Settings button. On the phone display, a list of four options appear.
2. Use the scroll down arrow key for the phone display to highlight option number
two, Ring Type (or press the 2 button on your number pad).
NOTE: If you pressed 2, go to step four.
10 Basic Phone Features
•
The handset positioned above and to the left of the telephone
indicates the line is off-hook (has dial tone).
Number mode - Same as for Registered mode. Indicates the line can be
used to place calls by dialing phone numbers (pressing the keys on the
dial pad will produce numbers).
•
Pressing the SPEAKER button. The speakerphone turns on.
•
Pressing a line button. The speakerphone turns on.
•
Picking up the handset.
Pressing Dial.
Pressing the SPEAKER button.
Pressing a line button.
Picking up the handset.
Cisco 7960/7940 Telephone User Guide
620-05600230