Deleting An Abbreviated Dial Code; Verifying An Abbreviated Dial Number; Anonymous Call Rejection - Cisco 7960 User Manual

5. Dial the phone number you want to assign to this Abbreviated Dial code
followed by the # sign, or press * to cancel.
The phone number you entered for this Abbreviated Dial number is repeated
back.
NOTE: Be sure to enter all the numbers normally required to dial the call. This
includes the area code for long distance calls and may include the area code
for local calls in some areas.
6. Press # to save the changes or * to exit without saving.
7. Program or verify another Abbreviated Dial code or hang up to exit.

Deleting an Abbreviated Dial Code

1. Press 75*.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
NOTE: A voice prompt will lead you through the remaining steps.
3. Press 1 to program (set) the Abbreviated Dial code (00-99).
4. Press the digits of the Abbreviated Dial code to delete followed by the # sign.
A confirmation message tells you: "No number was entered."
5. Program or verify another Abbreviated Dial code or hang up to exit.

Verifying an Abbreviated Dial Number

1. Press 75*.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. Press 2 to verify (check) an Abbreviated Dial code (00-99).
4. Press the Abbreviated Dial code you wish to verify.
The phone number you entered for this Abbreviated Dial number is repeated
back.
5. Program or verify another Abbreviated Dial code or hang up to exit.

Anonymous Call Rejection

When enabled, this feature rejects calls from callers who block the display of their
caller ID information.
Cisco 7960/7940 Telephone User Guide
620-05600230
System Telephone Features 21