Configuring Outlook To Use Tapi - Cisco 7960 User Manual

Windows is now configured to allow users to make calls from their contacts, but the
TAPI-enabled program must be configured to use the line for dialing. For
information on configuring the program to use the telephone line for dialing, go to
the next section, "Configuring Outlook to Use TAPI".

Configuring Outlook to Use TAPI

To configure Outlook or another TAPI-enabled program to dial using the system,
use the following steps:
1. If not already running, start Outlook (or the TAPI-enabled application).
2. Click the Contacts icon to switch to the Contacts listing.
3. Right click any contact to bring up the Actions pop-up menu.
126 Set Up Outlook for TAPI Cisco 7960/7940 Telephone User Guide
620-05600230