Web Configuration - Safety Vision OBSERVER 4120 User Manual

42

Web Configuration

The Observer 4120 includes a web-based configuration
menu that can be accessed with a Windows based PC
and browser. It provides much of the same functionality
as an external monitor and remote control when these
accessories are not available or practical.
Use the following procedure to access the web
configuration menus:
1.
Determine the IP Address of the HVR.
The default IP address is 192.168.1.100. Check the Network
tab in the Setup menu to confirm the correct IP address if it
has been changed.
2.
Connect the PC to the HVR's RJ-45 port with a
standard Ethernet cable.
3.
Ensure the HVR is receiving power and has started
up.
4.
Set a sequential static IP address for the LAN
connection connected to the HVR.
For example, if the HVR's IP address is 192.168.1.100, set a
static IP address of 192.168.1.101.
In Windows, this can be accomplished in the Internet
Protocol (TCP/IP) Properties window, accessed through the
properties of the Local Area Connection.
5.
In Windows Internet Explorer,
navigate to the HVR's IP
address.
6.
Run any Active X controls
if and when prompted by
Internet Explorer.
The Login screen appears.
7.
Enter a User name and
Password and click Login.
Additionally, you can click
the Safety Vision Technical
Support link to directly access
Safety Vision's Technical
Support request form (internet
access required).
OBSERVER 4120 USER GUIDE