Table of Contents
Advertisement
5.2 CHIMNEY MAINTENANCE
The most efficient way to sweep a chimney is to run a hard chimney sweeping
brush. Brush from the top down so sooth and creosote deposits will detach from
the chimney liner and fall down to the bottom of the chimney where it can be
easily removed.
The chimney must be inspected regularly and any creosote build-up must be
removed without delay. Monthly cleaning should be sufficient during cold winter
months while more frequent cleaning could be required during milder periods.
5.3 SMOKE PIPE INSPECTION
The smoke pipe must be inspected regularly during the heating season.
The pipe must be examined carefully to detect any defect or damage.
The pipe can be reassembled if no defect is detected and defective pipe must
be replaced immediately.
Burn wood only in this furnace.
As a combustible, well seasoned hardwood in 18" logs works best.
5.4 BLOWER MOTOR MAINTENANCE
After 3 seasons of operation, lubricate the motor annually with a few drops of
5W30 oil.
DO NOT OVERLUBRICATE
5.5 FILTERS
Never use the furnace without air filters. To function as expected, controlled
combustion wood burning appliance must be maintained on a regular basis. This
means that the chimney, the gaskets and the pipes must be kept in good working
order and the air filter cleaned or replaced regularly. Use the same size and type
of filter as the original.
Air filter dimensions
15" x 20" Filters (Mini-Caddy) #21044
55
Advertisement
Table of Contents
