Remote Keypads; Introduction; Remote Keypad Layout; Using Remote Keypads - Menvier Security TSD402 User Manual

Remote Keypads

Remote Keypads

Introduction

The TSD402 system may have been fitted with one or more remote keypads to allow remote
operation of the system. The remote keypad uses LED indicators to show zone faults and alarms,
and an internal sounder to indicate exit and entry tones.

Remote Keypad Layout

Indicator LEDs

Using Remote Keypads

It is advisable that the remote keypad is only used for setting/part-setting and unsetting, although it
can be used for limited programming and testing of the system. However, if a menu option is
selected which is not programmable using the remote keypad (e.g., Dialler Programming) all zone
indicator LEDs will flash. If this occurs press the AWAY key to abandon the option, the system will
return to the unset mode and the green unset LED on the remote Keypad will be illuminated.
26
2 3 4
1
U NSET TAMPER FIN AL EXIT
1
4
7
HOME
TS400
TSD402 User Manual
5
2 3
5 6
8 9
0
AWAY
Tactile rubber keypad