Cooper Security i-on 16 Installation And Programming Manual page 36

Programming
Note: If you wish to leave the name unchanged then
X
press . The display leaves the name change screen
and restores the name of the zone to its previous
value.
Press when you have finished entering text.
Y
Figure 23. Letters Assigned to Keys
Zone Types
When the control unit first learns a detector the zone type
defaults to Normal Alarm. The zone types available are:
Not Used
The alarm system will not respond when an event
triggers this detector.
Normal Alarm.
A zone programmed as 'Normal Alarm' will start an
alarm when the system is set. (See "Zone Attributes"
on page 34.)
Entry Route.
Use this zone type for detectors sited between the
Final Exit door/detector and the control unit. If an
'Entry Route' zone is violated when the system is set,
an alarm will occur. If the entry/exit timer is running
when an Entry Route zone is violated then no alarm
occurs until the entry/exit timer expires.
Note: If you give an Entry Route zone the Part Set
attribute then you can program that zone to behave
like a Final Exit zone if the user part sets the system.
See page 40.
Page 32
1 2 abc
A B C Æ Å Ä
4 ghi 5 jkl
G H I J K L
7 pqrs 8 tuv
P Q R S T U V
*
0
Space 0
3 def
D E F
6 mno
M N O Ø Ö
9 wxyz
W X Y Z
#
i-on16