Radio Keypad - Cooper Security i-on 16 Installation And Programming Manual

i-on16
The display shows a message asking you to operate
the siren's tamper.
3. Operate the siren's tamper.
The control unit learns the siren's identity and gives a
double beep.
Deleting an External Siren
To remove an external siren from the system:
1. Select Detectors/Devices – External Siren – Add/Del Ext
Siren.
The display shows two possible "memory slots" for
external sirens. A slot already allocated to a siren
shows a "*" at the beginning of its line.
2. Select the siren you want to delete.
The display shows the message "Delete Ext Siren".
3. Press Y to make the control unit "forget" the siren ID
learned into that memory slot.
The control unit forgets the siren's identity, removes
the "*" from the end of the line, and gives a double
beep.

Radio Keypad

The Radio Keypad is a transmitter that users can employ
to set and unset the system remotely. The Radio Keypad
is a transmitter only, and does not display any system
information.
The Radio Keypad has a keypad and a small light that
glows when it transmits a signal.
When installing a Radio Keypad you must first teach the
control unit the Radio Keypad's identity, and then
program the control unit with the function of each of the
Radio Keypad's buttons.
Select the Detectors/Devices – Radio Keypad to add, delete
or edit Radio Keypads.
Programming
Page 35