Table of Contents
Advertisement
Technical Specification
Fuses
The control unit has a 250mA mains fuse.
Electrical Safety
Conforms to EN60950-1.
Compliance Statements
This product is suitable for use in systems designed to
comply with PD 6662: 2004 at grade 2x and
environmental class II.
This product complies with the requirements of 50131-3
at grade 2 and environmental class II.
This product complies with the requirements of EN50131-
6:2008 at grade 2 and environmental class II.
When fitted with an I-SD01 this equipment is compliant
with EN 50136-1. It allows the alarm transmission system
to meet the performance requirements of EN 50131-
1:2006 ATS 2 provided that:
a) It is installed in accordance with the installation
instructions.
b) The connected PSTN is functioning normally.
If the installer selects a non-compliant configuration
then they must remove or adjust compliance
labelling.
Page 8
i-on16
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the i-on 16 and is the answer not in the manual?