Security And Passcode Programming - Orban Optimod-FM 8300 Operating Manual

2-32
INSTALLATION

Security and Passcode Programming


exit test (restores the operating preset that was on-air before a test
mode was invoked)

mod. reduction 1

mod. reduction 2

exit mod. reduction
F) When you have programmed an event to your satisfaction, press the S
E button.
VENT
You will return to the automation menu.
4. To edit an existing event:
A) Press the V
/ E
IEW
B) Turn the knob until you see the event you wish to edit.
C) Press the E
E
DIT VENT
D) Edit the event as desired. Use the same technique as adding an event.
See step 3 on page 2-31.
E) Press the S E
AVE
5. To delete an event:
A) Press the D
ELETE
B) Choose the event to delete with the knob.
You can search by date or by event (i.e., recalling a given preset). Use the
N button to navigate from one type of search to the other type.
EXT
C) When you have located the event you want to remove, press the D
button.
E
VENT
This action will immediately delete the event. There is no "are you sure"
warning message. To abort the deletion, press the E
D E
ELETE VENT
[Skip this step if you do not plan to use PC Remote software or do not plan to lock
out the front panel locally.]
The 8300 has several levels of security to prevent unauthorized people from chang-
ing its programming or operating state. Security controls access to the front panel
and to anyone connecting to the 8300 through a direct serial connection, dial-up
networking (through modems), or its Ethernet port.
The security levels are:
button.
E
DIT VENT
button.
button to store your edits.
VENT
button.
E
VENT
button.
ORBAN MODEL 8300
AVE
ELETE
button, not the
SC