2-68
INSTALLATION
e) Set
"Maximum
(bps)" to "115200."
f) Check "Enable hardware
flow control."
g) Check "Enable modem
error control."
h) Check "Enable mcdem
compression."
i) Make sure that no other
box is checked.
j) Click "OK."
k) Select the Networking
tab.
l) Make sure that "PPP:
Windows 95 / 98 / NT4 /
2000,
Internet"
pears in the "Type of
dial-up
server
calling" field.
m)Make sure that "Inter-
net Protocol (TCP/IP) is
checked.
You may leave "Cli-
ent
for
Networks" checked
if you like.
n) Click "OK."
o) When the "Connection
properties" window ap-
pears, click "OK."
2. Launch an existing Windows XP modem connection.
Once you have set up a "connection" specifying a modem connection in the 8300
PC Remote application (see To set up a new connection on page 3-63), choosing
this connection from 8300 PC Remote automatically opens a Windows modem
connection to your 8300.
speed
ap–
I
am
Microsoft
ORBAN MODEL 8300