To Unlock The Front Panel; Dial-Up Networking And The Passcode; If You Have Forgotten Your Passcode - Orban Optimod-FM 8300 Operating Manual

OPTIMOD-FM DIGITAL
C) Press the E
SCAPE

To Unlock the Front Panel:

A) On the 8300 front panel, operate any button or the knob.
The P
ASSCODE
B) Enter a passcode using the four soft buttons.
The 8300 functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in S
new delay at any time if you have an A

Dial-up Networking and the Passcode

When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 8300's front panel. Once your PC is connected to the 8300, you will be able to
access the 8300 functionality corresponding to the security level of your passcode.
If you have not set a passcode, leave the Windows dialog box blank.

If You Have Forgotten Your Passcode

You can reset factory defaults and wipe out security passcodes (in case you forgot
your A passcode).
A
LL CCESS
A) Remove power from the 8300.
B) While pressing both the E
The Restore Defaults screen appears.
C) To gain access to the 8300, press the E
D) Reprogram passcodes as necessary; see To Create a Passcode on page 2-33.
The RESTORE DEFAULTS button (in the Restore Defaults screen) restores
all System Setup and Input/Output parameters to their factory default
settings. It also erases all passcodes. You should never need to use this
button in an existing installation, although it is a convenient way to
make the 8300 "factory fresh" if it is being installed in a different facility.
The RESTORE DEFAULTS button takes you to a screen that allows you to
keep or erase any user presets that exist in your unit.
button to leave the Security menu.
screen will appear.
ETUP
and S
SCAPE
/ S / A
ECURITY UTOLOCK
A passcode.)
LL CCESS
buttons, restore power.
ETUP
A P
RASE LL ASSCODES
INSTALLATION
. (You can set a
soft button.
2-35