Orban Optimod-FM 8300 Operating Manual page 86

Digital audio processor
Table of Contents

Advertisement

2-38
INSTALLATION
a) Press the
S
ET
b) Use the
N
EXT
subnet mask. Use the knob to set the digit to the desired value. Repeat
until you have selected all the numbers in the subnet mask assigned by
your network administrator
c) Press the
S
AVE
D) Set the Gateway Address assigned by your network administrator if necessary:
a) Press the
G
ATEWAY
b) Use the
N
EXT
gateway address. Use the knob to set the digit to the desired value. Repeat
until you have selected all the numbers in the gateway address assigned by
your network administrator
c) Press the
S
AVE
E) Set the IP Port assigned by your network administrator if necessary:
a) Press the
IP P
b) Use the
N
EXT
port. Use the knob to set the digit to the desired value. Repeat until you
have selected all the numbers in the IP port assigned by your network
administrator
c) Press the
S
AVE
F) Connect your Ethernet network to the RJ45 jack on the rear panel of your
8300.
If you are connecting to a hub or router, use a standard Ethernet cable.
If you are connecting directly to the Ethernet jack on a computer, use a
"crossover" or "reverse" Ethernet cable.
G) Press the N
button.
EXT
2. Prepare the 8300 for modem connection through the serial port:
[Skip this step if you will not be using a modem connection.]
A) Navigate to S
ETUP
B) Hold down the PC C
M
on the display.
ODEM
C) Press the M
ODEM
D) If the string that appears in the display is S0=4, this is correct. Press the
E
button and skip steps (E) and (F) below.
SCAPE
S0=4 is the 8300 default setting. This activates auto-answer functionality
in the modem.
soft button.
S
M
UBNET
ASK
and
keys to move the cursor in turn to each digit in the
P
REV
soft button to confirm your setting.
soft button.
A
DDRESS
and
keys to move the cursor in turn to each digit in the
P
REV
soft button to confirm your setting.
soft button.
ORT
and
keys to move the cursor in turn to each digit in the IP
P
REV
soft button to confirm your setting.
/ N
& R
ETWORK
EMOTE
soft button and turn the knob until you see
ONNECT
I
soft button.
NIT
.
ORBAN MODEL 8300

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8300j

Table of Contents