Orban Optimod-FM 8300 Operating Manual page 79

OPTIMOD-FM DIGITAL
3. To add an automation event:
A) Push the A
DD
B) Choose whether you wish to program an event that occurs only once or an
event that follows a daily or weekly schedule.
C) For events that occur only once:
a) Use the
and turn the knob so that is reads "
b) Use the P
year when the automation event will occur. Set the desired values with the
knob.
c) Use the P
and second (in 24-hour format) when the automation event is to occur. Set
the desired values with the knob.
D) For events that occur on a daily or weekly schedule:
a) Use the P
week in turn, and use the rotary encoder to turn the day on or off.
You can program the event to occur on as many days of the week as you
wish.
b) Use the P
and second (in 24-hour format — e.g., 18:00:00 for 6:00 PM) when the
automation event is to occur. Set the desired values with the knob.
Automation events have a "start" time but no "stop" time. The 8300 will
indefinitely remain in the state specified by an existing automation event
until its state is changed by another automation event or by another ac-
tion (such as a user's interacting with the front panel or PC Remote soft-
ware).
E) For all events:
a) Press the
b) Turn the knob to set the desired event. The available events are:

Recall factory preset

Recall user preset

stereo mode

mono-from-left-channel (MONO-L) mode

mono-from-right-channel (MONO-R) mode

mono-from-sum-of-channels (MONO-SUM)

bypass mode
button.
E
VENT
and buttons to move the cursor over the word "
P N
REV EXT
and N buttons to move the cursor to the day, month, and
REV EXT
and N buttons to move the cursor set the hour, minute,
REV EXT
and N buttons to move the cursor the each day of the
REV EXT
and N buttons to move the cursor set the hour, minute,
REV EXT
button.
S E
ELECT VENT
" instead.
DATE:
2-31
INSTALLATION
"
DAILY: