Section 2 Installation; Installing The 8300 - Orban Optimod-FM 8300 Operating Manual

OPTIMOD-FM DIGITAL
Section 2
Installation

Installing the 8300

Allow about 2 hours for installation.
Installation consists of: (1) unpacking and inspecting the 8300, (2) checking the line
voltage setting, fuse, and power cord, (3) setting the Ground Lift switch, (4) mount-
ing the 8300 in a rack, (5) connecting inputs, outputs and power, (6) optional con-
necting of remote control leads and (7) optional connecting of computer interface
control leads.
When you have finished installing the 8300, proceed to "Quick Setup," on page 2-
16.
DO NOT connect power to the unit yet!
1. Unpack and inspect.
A) If you note obvious physical damage, contact the carrier immediately to make
a damage claim. Packed with the 8300 are:
Quantity Item
1 Operating Manual
2 Line Cords (domestic, European)
2 Fuses (½ A-250V Slow-Blow for 115V; 250 mA-250V for 230V)
2 Fuse holders (gray for 115V fuses and black for 230V fuses)
4 Rack-mounting screws, 10-32 x ¾—with washers, #10
1 Null modem cable (for software upgrades and PC Remote connection)
1 PC Remote Software CD
B) Save all packing materials! If you should ever have to ship the 8300 (e.g., for
servicing), it is best to ship it in the original carton with its packing materials
because both the carton and packing material have been carefully designed
to protect the unit.
C) Complete the Registration Card and return it to Orban. (please)
The Registration Card enables us to inform you of new applications, per-
formance improvements, software updates, and service aids that may be
developed, and it helps us respond promptly to claims under warranty
without our having to request a copy of your bill of sale or other proof
2-1
INSTALLATION