Table of Contents
Advertisement
5.6 DOOR GASKET RELACEMENT
It is important to keep the door gasket in good condition. The door is adjusted at
the factory to seal the door tight. After a while, the gasket could sink and the door
must then be adjusted as described below. If the door still leaks after the
maximum adjustment, replace the gasket.
Door adjustment procedure:
1. Remove the blockage pin by turning and pulling it out with pliers.
2. Turn the handle counter clockwise to increase the pressure between the door
gasket and the stove body.
3. Reinstall the blockage pin by hammering it in carefully.
56
Advertisement
Table of Contents
