Recording The Colour Bars - JVC GY-DV5001 Instructions Manual

7. SHOOTING OPERATION

7-6 Recording the Colour Bars

Colour bar signal of the built-in signal generator
Compliance with EBU standard colour bar is output.
E-58
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
OPEN
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
CH-2
CH-1 CH-2
AUDIO INPUT
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
Whether the camera image should be output or whether the
colour bar of the built-in signal generator should be output can
be selected during record-standby and recording.
To output the colour bar, set the OUTPUT switch to the
BARS side.
To output the camera image, set the OUTPUT switch to
the CAM AUTO KNEE ON/OFF side.
MEMO:
● Whether or not the audio reference signal should be
output while the colour bar is output can be selected
with the TEST TONE item on the AUDIO menu screen.
● Colour bars will not appear when Full Auto is set to ON
or when in the VTR mode.
OUTPUT switch
POWER
VTR
ON OFF