JVC GY-DV5001 Instructions Manual page 23

● Status 2
This screen displays the camera setup statuses.
Event display is not available while this screen is displayed.
Indication
FULL AUTO ON, OFF
GAIN –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB, LOLUX, ALC
SHUTTER OFF, 1/6.25, 1/12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (STEP), V.SCAN 1/50.1 to
1/2067.8 (VARIABLE), EEI (in ALC mode)
WHITE BAL A, B, PRESET, FAW
IRIS LEVEL BACK L, NORMAL, SPOT L
FILTER 3200K, 5600K+1/8ND, 5600K, 5600K+1/64ND
ZEBRA 70-80%, 85-95%, OVER95%, OVER100%
REMAIN Remaining tape time (min) or tape type (Example: 95 min (
(when using MiniDV cassette),
* DVCAM indicates IC Memory compatible DVCAM cassette.
In the case of other DVCAM cassette than IC Memory compatible cassette,
Audio sampling frequency and audio level adjustment method (Example) 32K (CH1 Å CH2 ˜ ) Å (Auto)
AUDIO
˜ (Manual)
● Status 3
This screen only displays date and time, event display and alarm indications.
* Whether or not date and time should be displayed and the display style are set on the TIME/DATE MENU screen.
page 43 "Displaying the Time and Date on the Screen"
Status Screen in VTR MODE
No. Item
1
Indication of Time Code (TC)/User's Bits (UB)
2 Remaining tape time
3
Voltage indication
2. CONTROLS, INDICATORS AND CONNECTORS
Indication Contents
(when using standard cassette), DVCAM (when using DVCAM cassette)
8
Event display area
7
PLAY 01/02/03 AM01:23:45
6
In the playback mode, the recorded time code (hour, minute, second, frame)
is displayed. Whether or not to display this item is set with the TC/UB item
on the LCD/VF (2/2) menu screen. Whether to show the time code or the
user's bits is selected with the COUNTER switch inside the side cover.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3
minutes.
Whether or not to display this item is set with the TAPE REMAIN item on
the LCD/VF (2/2) menu screen.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the
indication of the remaining tape time appears.
(Example) 12.2 V : Indicates battery voltage in 0.1 V steps.
))
1
00:00:00:00
20min 2
5
3
48k 12.2V
4
Contents
or is indicated.
E-23