Table of Contents
Advertisement
RECORDING
Recording Files
Video Recording
Preparation: Set the power/mode switch to STANDBY/ON.
Slide the power/mode switch to
MODE to select
!
The
8 To stop recording
Press the REC button again.
8 To change the picture quality
Change the settings in [QUALITY].
(Z pg. 68)
8 To register a file to an event
See page 23.
NOTES
•
The video recording mode is automatically selected when you turn the camera's power off and
then on again.
•
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the
power/mode switch to OFF, then to STANDBY/ON. When using the AC adapter, perform any
operation such as zooming.
•
Video files are given the names MOV001.TOD to MOV009.TOD, MOV00A.TOD to
MOV00F.TOD, and MOV010.TOD in order of recording.
•
A new file will be created for every 4 GB or approx. 19 minutes of continuous shooting.
•
This camera records video in MPEG2 format compliant with SD-VIDEO format.
•
Do not move or shake the camera suddenly during recording. If you do so, the sound of the
hard disk drive may be recorded.
0
!
(video) mode.
The switch returns
MODE
to the original
position when it is
released.
lamp on the camera lights up.
Press the PLAY/REC button to
select recording mode.
SELECT
PLAY/REC
Press the REC button to start
recording.
REC
Approximate remaining time for
recording appears.
[ 4 h 5 9 m ]
REC
Advertisement
Table of Contents
