JVC GY-DV5001 Instructions Manual page 57

How to set the HEADER REC menu screen
HEADER REC menu screen
––– HEADER REC –––
START KEY
TC DATA
TC CLEAR
UB DATA
UB CLEAR
BARS TIME
BLACK TIME
PAGE BACK
Cursor Item
Executing the HEADER REC Function
HEADER REC
During HEADER REC
MEMO:
To stop during HEADER REC operation, press the VTR
trigger button or the Stop button.
MEMO:
● The HEADER REC menu screen cannot be opened during
HEADER REC recording.
● HEADER REC operation is accepted even during loading
of the cassette tape.
● The date and time recorded in the colour bar section will
be in accordance with the settings for the DATE REC item
on the TIME/DATE menu screen.
● Date and time data are not written during recording of black
video signals.
● The test tone (1 kHz sine-wave) recorded in the color bar
section will be recorded unrelated to the setting for the
TEST TONE item on the AUDIO menu screen.
● The time code preset on the TC/UB/CLOCK menu screen
becomes invalid when HEADER REC recording is
performed.
● The user's bits following completion of HEADER REC
recording will be the user's bits value set on the TC/UB/
CLOCK menu screen.
● The running of the time code following completion of
HEADER REC recording will be in accordance with the
setting of the TC GENE switch.
STOP+VTR
00:00:00:00
EXECUTE
CANCEL
00 00 00 00
EXECUTE
CANCEL
30SEC
30SEC
Set value
7. SHOOTING OPERATION
1.
Display the HEADER REC menu screen.
Press the STATUS button for 1 second or longer to display
the TOP MENU screen. Use the SHUTTER dial to select
TC/UB/CLOCK menu
press the SHUTTER dial.
2.
Setting the HEADER REC menu screen.
1 Select the menu item.
Rotate the SHUTTER dial to align the cursor ( ) with
the item to be set, and then press the SHUTTER dial.
● The setting area of the selected item starts blinking.
2 Changing the setting value.
Rotate the SHUTTER dial to change the setting, and
then press the SHUTTER dial.
In the case of the TC DATA item and the UB DATA item,
the blinking digit position moves when the SHUTTER dial
is pressed. When the SHUTTER dial is rotated, the value
of the blinking digit changes. After all the digits have been
set and the SHUTTER dial is pressed, EXECUTE starts
blinking. Press the SHUTTER dial once more to confirm
the set value.
3.
To terminate the setting, press the STATUS button.
The START KEY item on the HEADER REC menu screen
should be set to STOP+VTR.
1.
Set the MODE switch to CAM mode.
Load the cassette and engage the Record-Standby mode
or the Stop mode.
2.
While pressing the STOP button, press the VTR trigger
button.
● The tape automatically rewinds to the beginning, and
HEADER REC operation starts from the beginning of the
tape.
After HEADER REC recording is performed for the
specified duration only, the Record-Standby mode is
engaged automatically.
● During HEADER REC recording, "HEADER REC" is
shown (blinking) on the LCD monitor and in the viewfinder.
3.
After HEADER REC recording is completed and the Record-
Standby mode is engaged, normal recording starts when
you press the VTR trigger button.
● When the TC GENE switch is set to either PRESET REC
or REGEN, the time code value at the start of the
recording will be the time code value set on the HEADER
REC menu screen.
FREE RUN: Continuous running.
REC RUN or REGEN: Runs only during REC.
● When the optional network pack KA-DV5000 is connected,
the HEADER REC section is also recorded on the CF card
when the MPEG REC item on the NETWORK PACK
CONFIG menu screen is set to TRIG.
• When the HEADER REC section should not be recorded
on the CF card, temporarily set the MPEG REC item to
OFF.
For normal recording, make sure to set the MPEG REC
item to TRIG or SPLIT.
• When the HEADER REC section is recorded on the CF
card, make sure to set the user's bits for the HEADER
REC section and the normal recording section to the
same value.
This is because the thumbnail management utilizes the
user's bits values and different values will result in
separation of the folder for management of the HEADER
REC section and the normal recording section.
HEADER REC menu, and then
E-57