Searching For Recorded Scenes (Edit Search) - JVC GY-DV5001 Instructions Manual

7. SHOOTING OPERATION

7-2 Searching for Recorded Scenes (Edit Search)

In the record-standby mode, it is possible to search for a scene when you want to check the recorded scene or continue recording
from the scene.
Screen indications during Edit Search
During Edit Search, the VTR mode is indicated as ED.FWD or
ED.REV on the LCD monitor or in the viewfinder. (When Status
1 screen is displayed.)
FIL1
F5.6
ED.FWD 01/02/03 AM01:23:45
ED.FWD: Forward search
ED.REV: Reverse search
E-54
EDITSEARCH
MONITOR
FILTER
3200K
1
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
00:00:00:00
20min
FAS
–3dB
FAW
I
SD
B
48k 12.2V
EDITSEARCH
OPEN
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR ATUS
CH-2
CH-1 CH-2
AUDIO INPUT
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
Engage the record-standby mode.
Searching the tape in forward direction
1.
Press the EDIT SEARCH + button. While the + button is
pressed, playback takes place at the normal speed.
2.
When the EDIT SEARCH + button is released, the standby
mode is reengaged.
Searching the tape in reverse direction
1.
Press the EDIT SEARCH – button. While the – button is
pressed, reverse playback takes place at –1times the
normal speed.
2.
When the EDIT SEARCH – button is released, the standby
mode is reengaged.
MEMO:
● Block noise may appear and the image may freeze
during search.
EDIT SEARCH
+ button
EDIT SEARCH
– button