Displaying The Time And Date On The Screen - JVC GY-DV5001 Instructions Manual

Displaying the Time and Date on the Screen

TC/UB/CLOCK menu screen
––– TC/UB/CLOCK –––
TC PRESET
TC CLEAR
UB PRESET
UB CLEAR
UB REC
HEADER REC..
TIME/DATE..
PAGE BACK
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY
DISPLAY MODE
DATE REC
DISPLAY STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
CLOCK ADJUST..
PAGE BACK
01/02/03 AM01:23:45
Date
Recording the Date and Time Data
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY
DISPLAY MODE
DATE REC
DISPLAY STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
CLOCK ADJUST..
PAGE BACK
00:00:00:00
EXECUTE
CANCEL
00 00 00 00
EXECUTE
CANCEL
ON
ON
BARS+CAM
OFF
DATE+TIME
DD/MM/YY
24HOUR
ON
FAS
–3dB
FAW
I
SD
B
12.2V
Time
ON
BARS+CAM
BARS+CAM
DATE+TIME
DD/MM/YY
24HOUR
ON
5. PREPARATIONS
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
1.
Display the TIME/DATE menu screen.
1 Select the TC/UB/CLOCK item on the TOP MENU
screen.
2 Select the TIME/DATE item on the TC/UB/CLOCK menu
screen.
2.
Set the TIME/DATE menu screen.
● DISPLAY item
MEMO:
To display the date and time recorded on the tape, set the
DATE REC item to OFF. When the DATE REC item is set
to BARS or BARS+CAM, the date and time recorded on
the tape are not displayed even if this item is set to ON.
● DISPLAY MODE item : Sets the video output mode in
BARS : Displayed when the OUTPUT switch
on the side section is set to BARS.
CAM : Displayed when the OUTPUT switch
on the side section is set to CAM.
BARS + CAM : Date and time are always displayed.
● DISPLAY STYLE: Sets the style in which the date and
time are displayed.
DATE + TIME: Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
Display of date and time in the various operation modes.
In Camera mode : The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
(Only when the DATE REC item is
set to OFF.)
In VTR stop mode : The last read date and time values
are displayed.
During DV signal input : The date and time from the DV
(GY-DV5001 only) connector are displayed.
To record the date and time data during shooting, make the
menu settings described below. When the DATE REC item on
the TIME/DATE menu screen is set to "BARS" or "BARS +
CAM", the screen size will be fixed at an aspect ratio of 4:3.
Setting the TIME/DATE menu
● DISPLAY item
: Set to ON.
● DATE REC item : Select the video mode in which date
and time data should be recorded.
BARS : Date and time data are recorded only
when colour bars are output.
BARS+CAM : Date and time data are recorded when
colour bars and camera image are
output.
OFF : Date and time data are not recorded.
MEMO:
DATE REC cannot be set during recording.
: Sets whether or not date and
time should be displayed. Set
to ON to display the indications.
which date and time should be
displayed.
E-43