JVC GY-DV5001 Instructions Manual page 63

When Using the GY-DV5001 as RECORDING Unit (Dubbing From Another Videocassette)
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUDIO
LEVEL
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1 CH-2
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
MODE switch
Date and time data:
Data transmitted from the playback unit is recorded.
Time code:
The data generated by the GY-DV5001's time code generator
is recorded.
REC 01/02/03 01:23:45
Backup Recording of the GY-DV5000's Camera Image and Sound Through the DV Connector
The GY-DV5000's camera image and sound can be recorded for backup on another component that is equipped with DV connector.
Recording operation is performed on the backup equipment simultaneously with performance of the recording operations on the
GY-DV5000.
Master unit
OPEN
EDITSEARCH
MONITOR
FILTER
3200K
1
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
LCD BRIGHT DISPLAY
MENU
AUDIO
LEVEL OPEN PULL
FRONT
AUTO IRIS FULL AUTO BLACK LOLUX REAR
CH-1 CH-2 CH-1 CH-2
MODE AUDIO INPUT
BACK L STRETCH VTR AUDIO SELECT
NORMAL NORMAL CH-1 CH-2
SPOT L COMPRESS CAM AUTO MANUAL
POWER VTR
ON OFF
Connections
Use the GY-DV5000 as the master unit.
Connect the master unit and the backup unit with a DV cable
Settings
Master unit (GY-DV5000)
● Place in CAMERA mode.
● Set the DV REC TRIGGER item on the OTHERS (1/2)
Menu Screen to ON.
Backup unit
● Place in DV signal input mode.
* Depending on the used component, it may be necessary
to set "REMOTE SELECT".
● When BR-DV600A or BR-DV3000 is used, set the Backup
Recording function to OFF.
● Insert the tape and set to STOP or REC PAUSE status.
OPEN
MODE
LCD BRIGHT DISPLAY
PULL
OPEN
FRONT VTR
REAR
CH-1 CH-2
AUDIO INPUT
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
CAM
Time code
00:00:00:00
Date and time
Backup unit
DV cable
Signal flow
9. USING EXTERNAL COMPONENTS
1.
Turn ON both units.
2.
Place the GY-DV5001 in the VTR MODE.
Press the MODE switch upward to turn on the VTR indicator.
3.
Insert the videocassettes.
GY-DV5001: Insert the videocassette to be dubbed to.
Playback unit: Insert the recorded videocassette.
4.
Connect the units with the DV cable.
5.
Start playback on the playback unit.
For details, see the instructions to the unit used for playback.
● The playback picture from the playback unit appears on
the GY-DV5001's LCD monitor and viewfinder screen.
6.
Press the VTR trigger on the GY-DV5001 to start recording.
To temporarily pause the recording, press the VTR trigger.
To restart the recording, press the VTR trigger again.
7.
When dubbing is completed.
Press the VTR trigger or the STOP button on the GY-
DV5001 to stop recording, and then stop playback on the
playback unit.
MEMO:
Depending on the player, sound may not be heard
momentarily from this unit when switching modes from
STILL to PLAY.
Operation
Start and stop of recording on the backup unit takes place in
accordance with the operation of the VTR trigger button on the
master unit.
Start and stop of recording on the backup unit takes place in
accordance with start and stop of recording on the master unit.
(Depending on the GY-DV5000/5001 or the backup unit, the
image, audio, and/or time code may deviate from what they
should be at the points where the recording is started or
stopped.)
MEMO:
● When the backup recording is started, the "TRIGGER
TO DV" indication is shown on the LCD or in the
viewfinder for 3 seconds.
● When the Backup Recording function of BR-DV600A or
BR-DV3000 is used, the DV REC TRIGGER item on the
GY-DV5000's OTHERS (1/2) Menu Screen should be
set to OFF.
● If the backup device is equipped with a feature to record
time codes input from the DV IN/OUT terminal (TC
DUPLICATE feature), time code data the same as on
the master side can be recorded.
● When using BR-DV600A as a backup device and
switching GY-DV5000 from the EDIT SEARCH or
PLAYBACK mode to the RECORD mode, noise will be
noticed on the monitor output screen of BR-DV600A
(backup will be correctly recorded).
E-63