JVC GY-DV5001 Instructions Manual page 22

2. CONTROLS, INDICATORS AND CONNECTORS
2-6 Indications on the LCD Monitor and in the Viewfinder (Cont'd)
● Status 1
In addition to the information on the Status 0 screen, this screen displays the following items.
No.
0 Time Code (TC)/User's Bits (UB) indication
A Remaining tape indication
B
Audio sampling frequency indication
C Audio level meter indication
D VTR mode indication
E Iris indicator display
F
Iris F-value indication
G
Filter position indication
H Standard audio level indication
E-22
Item
32 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
Indicates the time code (h:m:s:frame) or user's bits data.
(Example) Time code TC 00 : 00 : 00 : 00
User's bits UB FF EE DD 20
Whether or not to display this item is set with the TC/UB item on the LCD/
VF (2/2) menu screen. Whether the time code or user's bits should be
shown is selected with the COUNTER switch inside the side cover.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3
minutes.
Whether or not to display this item is set with the TAPE REMAIN item on
the LCD/VF (2/2) menu screen.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be regarded only as a guide.
* When the unit is used at low temperatures, it may take a while before the
indication of the remaining tape time appears.
is set to 32 K. (Audio is recorded with 12-bit, 32 kHz sampling.)
48 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
is set to 48 K. (Audio is recorded with 16-bit, 48 kHz sampling.)
Displays the CH-1, CH-2 audio level meters.
Whether or not to display this item is set with the AUDIO item on the LCD/
VF (2/2) menu.
STBY : In record standby mode (record-pause mode)
REC : During recording
ED.FWD : Edit search in forward direction
ED.REV : Edit search in reverse direction
PLAY : During playback
FF : During fast forward
REW : During rewind
STL : During still picture playback mode
BSRH : During blank search
FWD : During playback in forward direction (FWD1: About 5 speed,
FWD2: About 10 speed, FWD3: About 20 speed)
REV : During playback in reverse direction (REV1: About 5 speed,
REV2: About 10 speed, REV3: About 20 speed)
STOP : Stop mode (Tape protect mode)
EJECT : Cassette being ejected
– – – : No tape loaded
: Iris set higher than normal
: Iris set to normal
: Iris set lower than normal
Indicates the F-number of the connected lens.
OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
It is not displayed when the lens is removed. For some lenses, no display
appears.
The indication can be switched ON/OFF with the F.NO/IRIS IND. item on
the LCD/VF (1/2) menu screen.
Indicates the current filter position
FIL1, FIL2, FIL3, FIL4
The indication can be switched ON/OFF with the FILTER item on the LCD/
VF (1/2) menu screen.
The level at which audio is recorded on the tape is indicated by " ".
–20dB, –12dB
See "AUDIO REF. LEVEL" on page 74.
Contents
–20dB –12dB
CH 1
CH 1
CH 2
– – – +
– – – +