Recording The Color Bars; Recording The Colour Bars - JVC GY-DV5100 Instructions Manual

7. SHOOTING OPERATION

7-6 Recording the Color Bars

EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
SHUTTER STATUS
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
MODE
BACK L STRETCH VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
Color bar signal of the built-in signal generator
Compliance with SMPTE standard color bar is output.
White Yellow Cyan Green Magenta Red Blue
Blue Black Magenta Black Cyan Black White
Black White Black
60
OUTPUT switch
OPEN
POWER
VTR
LCD BRIGHT DISPLAY
AUDIO
PULL ON OFF
LEVEL OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
Whether the camera image should be output or whether the
color bar of the built-in signal generator should be output can
be selected during record-standby and recording.
■ To output the color bar, set the OUTPUT switch to the
BARS side.
■ To output the camera image, set the OUTPUT switch to
the CAM AUTO KNEE ON/OFF side.
MEMO:
● Whether or not the audio reference signal should be
output while the color bar is output can be selected with
the TEST TONE item on the AUDIO/VIDEO menu screen.
● Color bars will not appear when Full Auto is set to ON or
when in the VTR mode.
7. SHOOTING OPERATION

7-6 Recording the Colour Bars

EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
SHUTTER STATUS
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
MODE
BACK L STRETCH VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
Colour bar signal of the built-in signal generator
Compliance with EBU standard colour bar is output.
E-60
OUTPUT switch
OPEN
POWER
VTR
LCD BRIGHT DISPLAY
AUDIO
PULL ON OFF
LEVEL OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
Whether the camera image should be output or whether the
colour bar of the built-in signal generator should be output can
be selected during record-standby and recording.
■ To output the colour bar, set the OUTPUT switch to the
BARS side.
■ To output the camera image, set the OUTPUT switch to
the CAM AUTO KNEE ON/OFF side.
MEMO:
● Whether or not the audio reference signal should be
output while the colour bar is output can be selected
with the TEST TONE item on the AUDIO menu screen.
● Colour bars will not appear when Full Auto is set to ON
or when in the VTR mode.