JVC GY-DV5001 Instructions Manual page 39

Cassette cover
Unloading the Cassette
1.
Set the POWER switch to ON.
2.
Slide the OPEN knob to the side to open the cassette cover.
3.
Press the EJECT button.
Tape ejection starts.
MEMO:
● It takes a few seconds before the cassette is ejected
after the EJECT button is pressed.
● If the cassette is difficult to remove even when performing
the eject operation, press the EJECT button again.
● Do not close the cassette cover during the eject
operation.
4.
Take out the videocassette.
5.
Close the cassette cover.
CAUTION:
● Do not leave the unit for a long period with the cassette
cover open. Dirt or other foreign objects may enter the
VCR section and cause malfunction.
● Do not touch the cassette insertion slot or cassette during
the eject operation. This could result in damage.
OPEN knob
5. PREPARATIONS
EJECT button
Cassette
cover
E-39