Recording The Color Bars - JVC gy-dv5100 Instructions Manual

7. SHOOTING OPERATION

7-6 Recording the Color Bars

Color bar signal of the built-in signal generator
Compliance with SMPTE standard color bar is output.
White Yellow Cyan
Blue Black Magenta Black
Black White
Downloaded From CamcorderManual.com JVC Manuals
60
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
5600K
.3
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER VTR
ON OFF
Green Magenta Red
Cyan Black
Black
OPEN
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
Whether the camera image should be output or whether the
color bar of the built-in signal generator should be output can
be selected during record-standby and recording.
■ To output the color bar, set the OUTPUT switch to the
BARS side.
Blue
■ To output the camera image, set the OUTPUT switch to
the CAM AUTO KNEE ON/OFF side.
MEMO:
● Whether or not the audio reference signal should be
output while the color bar is output can be selected with
White
the TEST TONE item on the AUDIO/VIDEO menu screen.
● Color bars will not appear when Full Auto is set to ON or
when in the VTR mode.
OUTPUT switch
POWER VTR
ON OFF