Left Side Section - JVC GY-DV5001 Instructions Manual

2. CONTROLS, INDICATORS AND CONNECTORS

2-3 Left Side Section

1
[MONITOR OUT] Monitor output connector (BNC)
● Composite video signal output connector.
Camera mode: The camera image is output.
VTR mode: The playback image is output in the VTR
playback mode.
● When a DV signal (IEEE 1394) is input, the EE image of
the input video signal is output. (GY-DV5001 only).
MEMO:
● When the OUTPUT CHAR. item on the OTHERS
(1/2) menu screen is set to ON, the same on-screen
indications as those on the viewfinder will be shown
on the external monitor. (Black and white indications)
2
[Y/C OUT] Y/C output connector (4-pin)
● Output connector for separate YC video signal.
Camera mode: The camera image is output.
VTR mode: The playback image is output in the VTR
playback mode.
● When a DV signal (IEEE 1394) is input, the EE image of
the input video signal is output. (GY-DV5001 only).
MEMO:
● When the ASPECT RATIO item on the CAMERA
OPERATION menu screen is set to LETTER, 16:9
aspect ratio distinction ID signal is output.
● When the OUTPUT CHAR. item on the OTHERS
(1/2) menu screen is set to ON, the same on-screen
indications as those on the viewfinder will be shown
on the external monitor. (Black and white indications)
E-16
PUSH
LINE OUT
CH-1
Y/C OUT MONITOR OUT
CH-2
e w q
FRONT
AUDIO IN
LENS
3
[CH1/CH2 LINE OUT] CH1/CH2 line output
connector (RCA)
Output connector for audio signals.
● Outputs the input audio signal in the Camera mode.
● Outputs the playback audio signal in the VTR mode.
● When a DV signal (IEEE1394) is input, the EE sound of
the input audio signal is output in the VTR mode. (GY-
DV5001 only)
MEMO:
● Alarm sound is not output.
4
Microphone attachment holes
For attaching the microphone holder KA-A50U (optional)
when the optional microphone MV-P615U or MV-P618U is
used.
See "Attaching the Microphone (optional)" on page 31.
r