Operation
Operating Instructions 610/630 - 00.0 - 05/2014
• For elastic seams (detail image (b)):
Feed the thread through the thread lever (9) and then via the
left bar of the thread regulator (8) (WARNING – Exaggerated
depiction for better visibility).
11. Feed the thread from above downwards through the thread
guide (10) on the machine head.
12. Feed the thread from above forwards and downwards to the
rear through the thread guide (11) on the needle bar.
13. Insert the thread from the front to the back through the needle
eye (12).
5.6 Threading the looper thread
WARNING
Risk of injury from moving parts.
Switch off the sewing machine before inserting
the thread.
Fig. 9: Fitting the looper thread reel
(1) – Guide on unwinding bracket
1. Fit the thread reel on the right plate of the reel stand (2).
2. Insert the thread from the back to the front through the first
hole and then in a wavelike manner through the next two holes
of the guide on the unwinding bracket (1).
Important: The unwinding bracket (1) must be parallel to the
reel stand (2).
(2) – Reel stand
29