EDIT mode Correct fullness in the current segment
90
Fig. 46: Correct fullness parameter
The area on the left contains buttons for the manual input
of fullness.
Icons/buttons
Meaning
Input fullness.
Set fullness is displayed by a button
marked in red.
Select type of fullness:
• Top (top feed)
• Bottom (bottom feed)
• Top and bottom (differential between top
and bottom feed)
The selected fullness is displayed by an
activated control field.
Display of further buttons used to input
fullness. The buttons from 0 to 16 are
available for inputting figures.
Operating Instructions 610/630 - 00.0 - 05/2014
Software settings