Table of Contents
Advertisement
Software settings
MAN mode Setting the fullness
Operating Instructions 610/630 - 00.0 - 05/2014
The following table explains the individual icons and buttons
for the manual adjustment of fullness.
Icons/buttons
1. Select type of fullness.
The selected type is displayed by an activated control field
in the icon.
2. If a higher or lower fullness is required, display further buttons
using the arrow buttons.
3. Input fullness with the buttons 0 to 16.
Meaning
Input fullness
Set fullness is displayed by a button
marked in red.
Selection of fullness:
• Top (top feed)
• Bottom (bottom feed)
• Top and bottom (differential between
top and bottom feed).
The selected fullness is displayed
by an activated control field.
Display of further buttons used to input
fullness. The buttons from 0 to 16 are
available for inputting figures.
75
Advertisement
Table of Contents
