Table of Contents
Advertisement
Software settings
Quick correction of the fullness before or during sewing
1. Bring the foot pedal to position 0.
2. Change the fullness by pressing on the buttons +F% and -F%.
3. Press the foot pedal forwards again and sew.
The changed fullness is used for sewing and displayed
on the control panel.
Changing parameters during sewing
1. Bring the foot pedal to position 0.
2. Change desired parameters on the control panel.
3. Press the foot pedal forwards again and sew.
The changed parameter value is used.
Canceling the seam program
1. Release pedal completely.
The seam program is canceled.
86
Operating Instructions 610/630 - 00.0 - 05/2014
Advertisement
Table of Contents
