DURKOPP ADLER 610 Operating Instructions Manual page 94

EDIT mode Other segment parameters
92
Parameter
Thread Trim
Thread Tension at Hook
Additional Fullness
After pressing the button Segment parameters, an overview
of all available parameters is displayed.
Fig. 48: Other segment parameters in the programming mode EDIT
Parameter
Thread Tension at Hook
Maximum Speed
Meaning
Thread cutter on/off
Value range: 0, 1
Looper thread tension.
Value range: 0...99
Setting the additional fullness
Meaning
Looper thread tension.
Value range: 0...99
Sewing speed/speed.
Value range: 100...4,000
Operating Instructions 610/630 - 00.0 - 05/2014
Software settings